Hello,
after replacing a S26361-D3373-A100 built into a TX1330M2
SYSTEMBOARD
with a
S26361-D3373-B100
Systemboard
I get a
PSU Config ERROR.
How can I change the PSU Configuration ?
The TX1330 has two redundant PSU
and a redundant FAN.
best regards
Moderator: ModTeam
To avoid the loss of non-default settings when replacing the system board, a
backup copy of important system configuration data is automatically stored from
the system board NVRAM to the Chassis ID EPROM. After replacing the
system board the backup data is restored from the Chassis ID board to the new
system board.
Users browsing this forum: No registered users and 1 guest