RX300 S7 Low Noise Mode

PRIMERGY, SPARC Enterprise Server, PRIMEFLEX, PRIMEPower, BS2000

Moderator: ModTeam

outlander
Posts: 2
Joined: Sun Mar 10, 2019 15:44
Product(s): RX300 S7

RX300 S7 Low Noise Mode

Postby outlander » Sat Mar 16, 2019 13:08

Hi,

I have bought a RX300 S7 and the server is in a separate room. Nevertheless the server is too noisy.

For some reason I am not able to enable the LNM in BIOS.

I know the limitations for LNM
only 1 DIMM per channel -> OK
CPU max 80W -> 2 x 11W OK
only PCIe 7 RAID -> OK
ambient temp < 25 -> 18 OK

BUT LNM is not activated.

One of the fans is spinning at 200% !?!?

Image

toomanylogins
Posts: 28
Joined: Sat Oct 07, 2017 17:00
Product(s): TX100 RX300

Re: RX300 S7 Low Noise Mode

Postby toomanylogins » Sat Dec 14, 2019 15:32

I had this problem so I removed the fans and heatsinks. replaced with artic freezer coolers. Got some patch jumper cables and connected the fans to the fujitsu connectors. Now its whisper quiet. You have to leave the lid off.


Return to “Server Products”

Who is online

Users browsing this forum: No registered users and 1 guest