But the server refused to boot after that. I've removed the card, but it still don't manage to get through the POST phase.
There is only a VGA monitor attached to the server. No keyboard, no pendrive, no additional extension cards (except the dedicated RAID controller in slot 10 and the disks).
The symptoms are the following:
- The fans and the hard disks spin up.
- There isn't any picture on the monitor. The iRMC video redirection shows no picture. No beeping.
- Every component is green in the iRMC.
- After a while it logs the following to the event log then the server turns itself off. The General Error led starts blinking.
Could you please help what should I check/do?