rx2510 m2 - cannot reboot to use USB drive via iRMC

PRIMERGY, SPARC Enterprise Server, PRIMEFLEX, PRIMEPower, BS2000

Moderator: ModTeam

Sunny_bhogal
Posts: 1
Joined: Fri Mar 16, 2018 14:40
Product(s): primergy rx2510 m2

rx2510 m2 - cannot reboot to use USB drive via iRMC

Postby Sunny_bhogal » Fri Mar 16, 2018 15:18

Hi,

Im not able to force the server to boot from the USB drive via iRMC.

Under "Power Management -> power on/off"

i edit the "Boot Options"
Boot Device Selector -> CDROM/DVD
Next Boot Only -> checkbox checked

I then proceed to reboot the server
Power Control -> Power Cycle
Apply and then Confirm

Once the server reboots, it boots from the HDD and not the USB as i believe it should from the above options selected

Is there a way to force a one time only boot from USB without going into the BIOS boot options (via F12 key)

Thanks
Sunny

Return to “Server Products”

Who is online

Users browsing this forum: No registered users and 1 guest