Dear Fujitsu support Team
My company recently bought a Fujitsu PRIMERGY TX300 S7 server from a second hand distributor.
Chassis Type: TX300S7F4
Serial: YLAX004934
BIOS Version: V4.6.5.3 R1.29.0 for D2949-A1x
System GUID: b0acbc51-8efb-264d-8988-c04fc4459ba4
We want to install Freenas operating system on it. It has D3116-B14 raid controller in it.
I try to switch it to JBOD mode in MegaCLI, but after i enabled it, the boot post stuck with B2 error code. When i switch off the JBOD mode, it is post normaly.
I try to replace the card to an LSI 9211-8i / Dell Perc H200 flashed in to IT mode.The card see the hard drives(12 drives 3TB), but i got the same B2 error at post.
Is there a way to use it in JBOD mode ? Or is there a HBA card which i dont get the B2 error.
Please help me to find a solution.