Firmware issue

PRIMERGY, SPARC Enterprise Server, PRIMEFLEX, PRIMEPower, BS2000

Moderator: ModTeam

Hariom
Posts: 2
Joined: Fri Dec 23, 2016 23:43
Product(s): PRIMERGY RX300 S8

Firmware issue

Postby Hariom » Fri Feb 24, 2017 20:22

Fujitsu Primergy rx300 s8

Firmware Version: 7.19F (Base: 7.19.F)
Firmware Date: Jan 21 2014 - 20:59:28 CET
Firmware Running: High Firmware Image
SDRR Version: 3.58 ID 0356 RX300S8

I have downloaded the new firmware from "http://support.ts.fujitsu.com/IndexDownload.asp?lng=COM"

For

OS VMware ESXi 5.5.0 build-4722766
RX300 S8 / D2939 iRMC (Kronos4) Firmware Update for TFTP Flash
Version (Date)
RX300S8_08.64F_sdr03.72 (02/11/2016)
Size
30 MB

Problem = Whenever I'm trying to install through tab iRMC S4 Firmware Update its not responding, process is taking 3 to 4 minutes but after that it is getting disconnect. After login the iRMC finding old version. I have rebooted the iRMC may time but its not solving the issue.

If any one reply on this that would be appreciative.

me@work
Posts: 1024
Joined: Thu Jun 22, 2006 15:32
Product(s): Scaleo Pi2662, Primergy

Re: Firmware issue

Postby me@work » Sat Feb 25, 2017 10:40

Which BIOS version does your RX300s8 run on?

Since iRMC FW 7.73, at least BIOS 1.15 is required, and with such a ridiculously old iRMC version, chances are that your board's BIOS is similarly old. Besides the fact that there are always dependencies between iRMC and board...

Did you consider to perform a "complete" system update using ServerView Update DVD, instead of a challenging attempt to force your iRMC into directly jump from 7.19 to 8.64?

Hariom
Posts: 2
Joined: Fri Dec 23, 2016 23:43
Product(s): PRIMERGY RX300 S8

Re: Firmware issue

Postby Hariom » Fri Mar 10, 2017 8:34

Hope you are doing good!

Thanks for your reply.

As you asked, I checked and found BIOS info as below:-
The server is mounted in remote location, Running OS is ESXi 5.5. I'm using iRMC to access the server. Is it possible to system update using ServerView Update DVD remotely.

BIOS InformationBIOS Version: V4.6.5.4 R1.6.0 for D2939-B1x


Return to “Server Products”

Who is online

Users browsing this forum: No registered users and 1 guest

cron