BX400 chassis - Blade servers go into S3 sleep after powered off, won't turn back on.

PRIMERGY, SPARC Enterprise Server, PRIMEFLEX, PRIMEPower, BS2000

Moderator: ModTeam

chris12599
Posts: 2
Joined: Thu Jan 12, 2017 17:58
Product(s): BX900 S1

BX400 chassis - Blade servers go into S3 sleep after powered off, won't turn back on.

Postby chris12599 » Mon Jan 16, 2017 15:12

BX924 S2 and SX960 S1 blade servers will not power on through the management blade or by manually pressing the power button on the blade servers. They are receiving power and the power button is amber in color. In each blade server, I have to re-seat the CMOS battery, power on the server, boot into the BIOS, change all settings to default and reboot. The servers are not affected if they are rebooted. Only when powered off.

I also tried putting in blade servers that have never been in the BX400 chassis before. Same result.

Is there a way to update and/or reset the firmware to default on the BX400 chassis?

Everything in the management blade shows that the servers should power back on after a power loss, and are not set to go into S3 sleep.

Return to “Server Products”

Who is online

Users browsing this forum: No registered users and 1 guest