Management Blade S1 (BX900/BX400) - Wrong firmware flashed, boot to slave firmware?

PRIMERGY, SPARC Enterprise Server, PRIMEFLEX, PRIMEPower, BS2000

Moderator: ModTeam

chris12599
Posts: 2
Joined: Thu Jan 12, 2017 17:58
Product(s): BX900 S1

Management Blade S1 (BX900/BX400) - Wrong firmware flashed, boot to slave firmware?

Postby chris12599 » Mon Jan 16, 2017 15:09

This management blade resides in a BX400 chassis but was flashed with firmware for the BX900 chassis. I know there are dip switches on the management blade to boot to the slave firmware instead of the master firmware. I have tried many different combinations, but i am unable to boot to the slave firmware.

I have found a PDF that show me what each dip switches does. But out of the 3 management blades i have tested, none will boot to the slave firmware. I know it's possible as i was able to do this once in the past. Any one know the right dip switches to enable?

Return to “Server Products”

Who is online

Users browsing this forum: Yahoo [Bot] and 2 guests