Fujitsu Primergy RX100 S6 not working.

PRIMERGY, SPARC Enterprise Server, PRIMEFLEX, PRIMEPower, BS2000

Moderator: ModTeam

hifipones
Posts: 1
Joined: Sat Jan 07, 2017 11:25
Product(s): Primergy RX100 S6 server

Fujitsu Primergy RX100 S6 not working.

Postby hifipones » Tue Jan 10, 2017 9:21

One of our Fujitsu Primergy RX100 S6 servers failed recently.

My opinion is that the main-board failed, but I would like to see if there would be any other thoughts.

Once I plug in the power cord to the PSU, it switches on and that's about it...

CSS indicator is lid up yellow
Global indicator is lid up red
Power on indicator is lid up green

All cooling fans start-stop occasionally so that part looks to be working.
No fault LED's are lid when I try the CSS button on the main-board.
This is what causes me to think it's a main board problem...

There is no output to the monitor from the VGA socket.
I cannot turn the server off from the power button, when I press and hold it nothing happens.
Only way to turn it off is to unplug the power cable.

Image

Return to “Server Products”

Who is online

Users browsing this forum: No registered users and 1 guest