Missing Com port in TX1310

PRIMERGY, SPARC Enterprise Server, PRIMEFLEX, PRIMEPower, BS2000

Moderator: ModTeam

jimdunleavy
Posts: 6
Joined: Sat Dec 15, 2012 12:06
Product(s): TX100S3

Missing Com port in TX1310

Postby jimdunleavy » Mon Dec 19, 2016 21:09

Hope someone can advise. I've installed several of these servers running 2012R2 and in all cases the on board com port is not showing in device manager, it is enabled in the bios. Most times it's not important but some users have older UPS with serial ports and I cannot install powerchute when it cannot see the device, any ideas please?

Suisso
Posts: 5
Joined: Wed Dec 14, 2016 15:20
Product(s): PRIMERGY: TX150 S7, TX150 S8, TX1310 M1, TX200, TX120 S3

Re: Missing Com port in TX1310

Postby Suisso » Tue Dec 20, 2016 9:04

Hello, http://manuals.ts.fujitsu.com/file/11661/tx1310m1-d3219-bios-en.pdf (4.9 and 4.10).

TX1310 M1 + Windows 2008 R2 + Serial Port (COM1) actived:

port1_tx1310m1.png
port1_tx1310m1.png (22.5 KiB) Viewed 749 times


port1_tx1310m1_.png
port1_tx1310m1_.png (39.14 KiB) Viewed 749 times


port1_tx1310m1__.png
port1_tx1310m1__.png (26.62 KiB) Viewed 749 times



Best Regards.


Return to “Server Products”

Who is online

Users browsing this forum: No registered users and 1 guest