Hello, i have a problem with iSCSI Boot configuration on server TX1310 M1 + installation of MS Windows (2008 R2 or 2012).
When I load the driver for my network card on the setup of Windows installation, the list of disk's is empty, i cannot see the target disk on iSCSI LUN (NAS QNAP TS453-Pro)!
But when i boot the server i can see the target disk:
I try a lot drivers of my network card onboard (in Intel website and Fujitsu website) but unsuccessfully, don't work!
Infos of server:
PRIMERGY TX1310 M1
S/N: YLTQ046672
Infos of NAS:
QNAP TS-453 Pro
Version: 4.2.2
P.S: - I followed the steps all of this tutorial: http://manuals.ts.fujitsu.com/file/9425/iscsi-boot-intel-win-en.pdf
- And the bios is up to date!
- Just to confirm that the iscsi connection (ISCSI Target) works if you install MS Windows 2008/2012 on RAID disks and configure iscsicpl on Windows! But I want to install and boot MS Windows Server directly through iSCSI without using physical RAID disks on the server!
Anyone can help me please ?
Thanks in advance.
Best Regards