BX924 IB Mezz Card Firmware

PRIMERGY, SPARC Enterprise Server, PRIMEFLEX, PRIMEPower, BS2000

Moderator: ModTeam

JDiprose
Posts: 1
Joined: Tue Sep 08, 2015 10:12
Product(s): BX900S2,BX924S4,RX200S8

BX924 IB Mezz Card Firmware

Postby JDiprose » Tue Sep 08, 2015 13:59

Dear Forum,

I have a bunch of BX924S4 blades with dual port FDR Infiniband mezz cards. The cards report as part number A3C40136348, I think S26361-F4534-E1 according to the configurator, and with Mellanox board_id: FJT0DB0100019. Reviewing the firmware levels across the cards shows three different firmware levels: 2.10.5190, 2.11.1250 and 2.30.3000.

I'd like to be at the same level across all the blades. I see from the BX924S4 downloads site there is a package to update the firmware to 2.11.1250. However, there is no package for 2.30.3000. Ideally I'd like to be at 2.32.5100 or 2.33.5100.

How do I go about getting an updated firmware package for this card? At least to 2.30.3000, ideally to 2.32.5100 or 2.33.5100.

Thanks,

Jon

Return to “Server Products”

Who is online

Users browsing this forum: No registered users and 1 guest

cron