TX100 S2 Doesn't start after power outage

[hitman3x]

I had a power outage recently and ever since my TX100 s2 does not POST.

When you press the power button it appears to start normally for 2 seconds then it appears like it restarts, and then it just stays on with the back fan slowly going to 100%.

Then it just sits there with the fan at 100% doing absolutely nothing, no video signal.
what do you think the issue could be

[me@work]

How long had this box been connected to mains uninterruptedly prior to the occurrence? And when had it last been switched off?

With the behavior details, I could imagine a problem with some mainboard components, perhaps some capacitors. That would mean you need to get the board to someone who's able to replace these, or you need to get in contact with your Fujitsu partner, to order a replacement mainboard...

[hitman3x]

about 3-4 months. It was switched off 1-2 times

[hitman3x]

anyway i can troubleshoot this to check if its the power supply? I dont know if its the power supply or the mobo..

[Tiderian]

is the irmc configured? if yes connect to and check the eventlogs

[Davie]

There is no iRMC on TX100