Fujitsu Technology Solutions - Forum


ServerView_RAID-5.02-04

PRIMERGY, PRIMEPower, BS2000

Moderator: ModTeam

ServerView_RAID-5.02-04

Postby hulbs9nw on Mon Mar 28, 2011 15:00

I have installed the latest version of ServerView RAID, which installs and starts successfully. I can login via the web page and everything looks great. I am then running the following command to connect to my ESXi (TX 200 S6 with a RAID 5/6 512MB card) server:-

amCLI -e 21/0 add_server name=ESXiServer port=5989 username=root password=*

I then restart aurad and it bombs immediately. I have edited /etc/init.d/aurad to enable debugging of amDaemon which produces the following output:-

Cannot adopt OID in FSC-RAID-MIB: svrTrapConsistencyCheckContinuedOnLogicalDrive ::= { svrNotifications# 10845 }
Cannot adopt OID in FSC-RAID-MIB: svrNumberLogicalDrives ::= { svrLogicalDriveInfo 1 }
Cannot adopt OID in FSC-RAID-MIB: svrLogicalDriveTable ::= { svrLogicalDriveInfo 2 }
Cannot adopt OID in FSC-RAID-MIB: svrLogicalDriveContentsTable ::= { svrLogicalDriveInfo 3 }
Cannot adopt OID in FSC-RAID-MIB: svrStatusLogicalDrives ::= { svrStatus 1 }
Cannot adopt OID in FSC-RAID-MIB: svrStatusPhysicalDevices ::= { svrStatus 2 }
Cannot adopt OID in FSC-RAID-MIB: svrStatusControllers ::= { svrStatus 3 }
Cannot adopt OID in FSC-RAID-MIB: svrStatusOverall ::= { svrStatus 4 }
snmp_parse_oid(name): Unknown Object Identifier (Sub-id not found: (top) -> svrObjects)
svrNotifications: Unknown Object Identifier (Sub-id not found: (top) -> svrNotifications)
piPSX4: Initialize: adapter count is 0
piAdpARC5: Initialize: adapter count is 0
piLSIMegaLib: Initialize: adapter count is 0
piLSIStoreLibIR2: Initialize: adapter count is 0
piLSIStoreLibIR: Initialize: adapter count is 0
piLSIStoreLib: Initialize: adapter count is 0
piFJR2Aries: Initialize: adapter count is 0
piLMD: Initialize: adapter count is 1
/etc/init.d/aurad: line 256: 4564 Segmentation fault $EXECDIR/amDaemon -k


If I use an older version of ServerView RAID then it works OK. Any ideas?
Last edited by hulbs9nw on Mon Mar 28, 2011 18:31, edited 1 time in total.
hulbs9nw
 
Posts: 28
Joined: Wed May 28, 2008 16:35
Product(s): All Servers

Re: ServerView_RAID-5.02-04

Postby me@work on Mon Mar 28, 2011 15:48

This problem *COULD* be caused by calling a wrong library.

You might want to alter /etc/init.d/aurad for this line, in case it isn't already:

Code: Select all
export LD_LIBRARY_PATH=/lib:/usr/lib:$WORKDIR/bin


If you're running your SV-RAID on CentOS 5.5 (which by the documents is not supported [only 5.1-5.4 is]), you will have to wait for 5.2.6 (due very soon).
me@work
 
Posts: 736
Joined: Thu Jun 22, 2006 15:32
Product(s): Scaleo Pi2662, Primergy

Re: ServerView_RAID-5.02-04

Postby hulbs9nw on Mon Mar 28, 2011 18:37

Thanks for the reply.

According to the download it supports RHEL 5.5 so I assumed that CentOS 5.5 would work, maybe I assumed incorrectly?

[Supported] Red Hat Enterprise Linux 5.5 (x86)

Also it works on 5.1.1 so maybe its just a bug. The LD_LIBRARY_PATH is already as you have posted, maybe I will just wait for 5.2.6

Regards
hulbs9nw
 
Posts: 28
Joined: Wed May 28, 2008 16:35
Product(s): All Servers

Re: ServerView_RAID-5.02-04

Postby me@work on Tue Mar 29, 2011 7:56

Well, so there does exist at least an error in all this documentation. I was referring to http://manuals.ts.fujitsu.com/file/9208/sv-esxi-support-en.pdf, page 17. Sorry for the confusion I might have caused.
me@work
 
Posts: 736
Joined: Thu Jun 22, 2006 15:32
Product(s): Scaleo Pi2662, Primergy


Return to Server Products

Who is online

Users browsing this forum: No registered users and 1 guest