Server Specific Datasheet

PRIMERGY, SPARC Enterprise Server, PRIMEFLEX, PRIMEPower, BS2000

Moderator: ModTeam

LMVR
Posts: 4
Joined: Fri Feb 03, 2023 14:43
Product(s): Fujitsu Primary TX 150 S8

Server Specific Datasheet

Postby LMVR » Fri Feb 03, 2023 14:51

Hi all,
I'm working on a Fujitsu Primary TX 150 S8. Its an old reliq but still does the work. In order to upgrade the software its runs I really need to know its detailed specifications. I have the serial number but not the physical computer at reach. Is it possible to obtain a detailed datasheet based on the serial number and not a generic model datasheet? if so, where?

Thanks in advance.
Regards.

User avatar
Ask Fujitsu
Moderator
Posts: 724
Joined: Fri Aug 02, 2019 10:02
Product(s): n/a
Contact:

Re: Server Specific Datasheet

Postby Ask Fujitsu » Tue Feb 07, 2023 11:56

Hello :)

If you are looking for driver, firmware for PRIMERGY TX150 S8 model, please access to Fujitsu technical support website and enter the model instead of serial number.
Firmware and drivers are available for the released operation systems.
https://support.ts.fujitsu.com/IndexDow ... e&OpenTab=

Hope this information helps.

Kind regards,

Forum Support Team

LMVR
Posts: 4
Joined: Fri Feb 03, 2023 14:43
Product(s): Fujitsu Primary TX 150 S8

Re: Server Specific Datasheet

Postby LMVR » Tue Feb 07, 2023 13:52

Hi,
Thank you for your reply.

I do not require drivers nor any other software or application. What I require is as simple as to know which processor is equipped in that machine, what are the memory specs, what is the hard drive size, etc. The general datasheet of a fujitsu product has many options and I need to know the exact configuration of the server, of which I only have the serial number.

Cheers.

User avatar
Ask Fujitsu
Moderator
Posts: 724
Joined: Fri Aug 02, 2019 10:02
Product(s): n/a
Contact:

Re: Server Specific Datasheet

Postby Ask Fujitsu » Wed Feb 08, 2023 17:38

Hello :)

In order to properly assist, could you please send us the serial number of PRIMERGY TX150 S8?

Thank you.

Best regards,

Forum Support Team

LMVR
Posts: 4
Joined: Fri Feb 03, 2023 14:43
Product(s): Fujitsu Primary TX 150 S8

Re: Server Specific Datasheet

Postby LMVR » Thu Feb 09, 2023 11:35

Hi
S.N.: YLGS012048
This server is running a Siemens SCADA application that need to be upgraded.

There are also newer versions in the same situation (TX2560 M2) of whom I dont have a S.N. but I was given a VFY code, which I belive its a product configuration code, but I dont know where to read it. Can you assist in this matter as well? (VFY:T2562SC040IN)

Best regards. Thank you.

User avatar
Ask Fujitsu
Moderator
Posts: 724
Joined: Fri Aug 02, 2019 10:02
Product(s): n/a
Contact:

Re: Server Specific Datasheet

Postby Ask Fujitsu » Mon Feb 13, 2023 15:05

Hello :)

In terms of PRIMERGY TX150 S8 server with the serial number YLGS012048 our team has checked the configuration. Please see below for details:

- Processor: Intel(R) Xeon(R) CPU E5-2420 0 @ 1.90GHz;
- Memory: one RAM module of 8 GB DDR3 1600 MHz;
- RAID controller: SAS-RAID CTR. LSI 2108 512MB 8P PCIe x8;
- Hard drives: 500GB BC SATA 7,2K 3.5 inches/WDC:WD5003ABYX (two drives in total);
- One Backplane SAS20BPWI_4_35HDD;
- One graphic card NVS300 512MB;
- One SATA DVD SM HH /HIT:GHB0N-B

Regarding TX2560 M2 server, the mentioned number (VFY:T2562SC040IN) points only to the model. Therefore we can't check the exact server configuration without serial number. You can check the server configuration (example link): https://www.stuff-uk.net/p-2536219.aspx
We are not sure, which components and how much memory, hard drives, network- and graphic cards are really built-in.

Thank you for your attention.

Kind regards,
Forum Support Team

LMVR
Posts: 4
Joined: Fri Feb 03, 2023 14:43
Product(s): Fujitsu Primary TX 150 S8

Re: Server Specific Datasheet

Postby LMVR » Mon Feb 13, 2023 15:29

Thank you for your reply,
That already helps.

Regards.


Return to “Server Products”

Who is online

Users browsing this forum: No registered users and 1 guest