Fujitsu Printer (FTP - 628MCL103#72) Programming manual

CELVIN NAS, Storagebird, Memorybird, Keyboards, WebCam, etc.

Moderator: ModTeam

Royston
Posts: 1
Joined: Mon Nov 23, 2020 11:12
Product(s): FUJITSU Thermal Printer FTP-628MCL103#72

Fujitsu Printer (FTP - 628MCL103#72) Programming manual

Postby Royston » Mon Nov 23, 2020 14:40

Is there any programming manual or sample code available to program FTP - 628MCL103#72 thermal printer with microcontroller ?

User avatar
Ask Fujitsu
Moderator
Posts: 724
Joined: Fri Aug 02, 2019 10:02
Product(s): n/a
Contact:

Re: Fujitsu Printer (FTP - 628MCL103#72) Programming manual

Postby Ask Fujitsu » Thu Nov 26, 2020 13:52

Dear Royston

Please wait for the email reply from Fujitsu Components America.

This printer FTP-628MCL103#72 is serviced and supported by them and we don´t have any experience with that product.

At your own risk and responsibility, you can also check the attached PDF file with details about 52610-3071Molex connection and PINout: ´ftp_628mcl101_103_72-1307790.pdf´.
On the Internet, you can also find this repository that contains the source code for printing with a thermal header similar to a FUJITSU FTP-628MCL103: https://github.com/romybompart/Thermal_ ... _stm32f107

NOTE: above repository was not tested nor used by Fujitsu CCD Team, therefore, we cannot guarantee you that it will work. Any steps to program the device are done at your own risk and responsibility (in case of bricking the device we will not be responsible for it).
We recommend contacting with components@us.fujitsu.com before. (https://www.fujitsu.com/us/products/dev ... index.html)

Best regards,
Fujitsu CCD Team


Return to “Accessories”

Who is online

Users browsing this forum: No registered users and 1 guest