Dear Royston
Please wait for the email reply from Fujitsu Components America.
This printer FTP-628MCL103#72 is serviced and supported by them and we don´t have any experience with that product.
At your own risk and responsibility, you can also check the attached PDF file with details about 52610-3071Molex connection and PINout: ´ftp_628mcl101_103_72-1307790.pdf´.
On the Internet, you can also find this repository that contains the source code for printing with a thermal header similar to a FUJITSU FTP-628MCL103:
https://github.com/romybompart/Thermal_ ... _stm32f107NOTE: above repository was not tested nor used by Fujitsu CCD Team, therefore, we cannot guarantee you that it will work. Any steps to program the device are done at your own risk and responsibility (in case of bricking the device we will not be responsible for it).
We recommend contacting with
components@us.fujitsu.com before. (
https://www.fujitsu.com/us/products/dev ... index.html)
Best regards,
Fujitsu CCD Team