Search found 64 matches

Go to advanced search

by Tom_A
Mon Dec 26, 2016 10:38
Forum: CELSIUS Workstations
Topic: Upgraded CPU in M470-2 - get microcode error on boot
Replies: 33
Views: 13366

Re: Upgraded CPU in M470-2 - get microcode error on boot

If you can access the BIOS, there is one option that might be useful: Advanced>CPU Mismatch Detection> [Enabled] About the shutdown issue, is there anything you changed before the problem appeared? That is usually software related (drivers, background process or bios settings, etc). It is a common i...
by Tom_A
Fri Dec 23, 2016 11:12
Forum: CELSIUS Workstations
Topic: Upgraded CPU in M470-2 - get microcode error on boot
Replies: 33
Views: 13366

Re: Upgraded CPU in M470-2 - get microcode error on boot

You could try the Intel Processor Identification Utility, maybe it can read the CPU data correctly. You can also do "file>save" and paste the result here if you don't mind. https://downloadcenter.intel.com/download/7838/Intel-Processor-Identification-Utility-Windows-Version The microcode u...
by Tom_A
Fri Dec 23, 2016 7:53
Forum: LIFEBOOK
Topic: Green dot is appearing on lifebook A555 screen
Replies: 1
Views: 3032

Re: Green dot is appearing on lifebook A555 screen

Sounds like a dead pixel or a faulty LCD cable.
by Tom_A
Fri Dec 23, 2016 7:51
Forum: CELSIUS Workstations
Topic: Upgraded CPU in M470-2 - get microcode error on boot
Replies: 33
Views: 13366

Re: Upgraded CPU in M470-2 - get microcode error on boot

Hi koocha,

Have you installed the latest BIOS version for your computer ?

Version 6.00.1.22 (19/12/2011):
http://support.ts.fujitsu.com/indexdown ... 6D4CC8EB30
by Tom_A
Wed Dec 21, 2016 8:42
Forum: Older products
Topic: Amilo Pa 2548 co-processor driver
Replies: 4
Views: 3900

Re: Amilo Pa 2548 co-processor driver

Could you describe how you did it, which drivers you tried and what was the result ? The missing co-processor is definitely tied to the nForce chipset so the best bet is chipset drivers from Fujitsu "nVIDIA nForce System Management Controller", "nVIDIA nForce Serial ATA Controller&quo...
by Tom_A
Tue Dec 20, 2016 13:24
Forum: Older products
Topic: Amilo Pa 2548 co-processor driver
Replies: 4
Views: 3900

Re: Amilo Pa 2548 co-processor driver

For the old nvidia chipset there are some WinVista drivers on the fujitsu website you could try to install in compatibility mode or just point Windows towards the extracted files when prompted for a driver. edit: Posting the same message in french and german forums using automatic translation is com...
by Tom_A
Tue Dec 20, 2016 12:11
Forum: Server Products
Topic: PRIMERGY TX1310 M1: iSCSI Boot + Installation MS Windows Server
Replies: 7
Views: 2719

Re: PRIMERGY TX1310 M1: iSCSI Boot + Installation MS Windows Server

Bonjour Suisso,

Have you tried setting the boot order as follows ?
1- ISCSI target
2- Windows Server 2008 R2 DVD

You could try to partition the LUN and format it first.
by Tom_A
Fri Dec 16, 2016 13:35
Forum: LIFEBOOK
Topic: CD Rom not displayed in Lifebook A555, Windows 7 64 bit
Replies: 3
Views: 3288

Re: CD Rom not displayed in Lifebook A555, Windows 7 64 bit

You don't need to install drivers to use the CD-ROM drive.

Can you push on the eject button to open the CD-ROM drive tray?
Is the CD-ROM drive listed in the BIOS boot menu? In Drive Configuration ?
by Tom_A
Fri Dec 09, 2016 15:44
Forum: LIFEBOOK
Topic: Information about software
Replies: 1
Views: 3095

Re: Information about software

Hello 007!

You can find all the necessary drivers and software on the website http://support.ts.fujitsu.com/

Make sure you select the right Operating System.

You can also do automatic driver update with Deskupdate: http://support.ts.fujitsu.com/Deskupdate/
by Tom_A
Wed Dec 07, 2016 11:19
Forum: CELSIUS Mobile Workstations
Topic: celsius h910 bios locked
Replies: 4
Views: 4165

Re: celsius h910 bios locked

Hi alex , From what you described I believe the system operates normally. The time in which the F2/F12 key has to be pressed is very short, you will have to press it several times immediately after pressing the power button. If you wait for the message " Press F2 for setup / F12 for boot" ...
by Tom_A
Tue Dec 06, 2016 12:05
Forum: CELSIUS Mobile Workstations
Topic: celsius h910 bios locked
Replies: 4
Views: 4165

Re: celsius h910 bios locked

Can you boot an external device ? Bootable USB drive? Recovery DVD?

If you don't press any buttons, do you get an error message?
by Tom_A
Fri Dec 02, 2016 10:50
Forum: LIFEBOOK
Topic: Lifebook AH531 Black screen
Replies: 5
Views: 8018

Re: Lifebook AH531 Black screen

Do you have a USB key? It's sort of a hail mary but try loading the Bios admin pack from https://support.ts.fujitsu.com/index.asp?lng=EN on a USB key and try to boot DOS with it (look for instructions in "comments" or readme). If that doesn't do it then the only way I know to fix this is r...
by Tom_A
Thu Dec 01, 2016 12:49
Forum: LIFEBOOK
Topic: Lifebook AH531 Black screen
Replies: 5
Views: 8018

Re: Lifebook AH531 Black screen

Hi Generaal Geelvis, I'm afraid the worse has happened, if the BIOS is damaged that cannot be reversed but here's a few questions, to be sure: Does the laptop screen turn on or it doesn't receive power at all? Is there anything displayed on screen when you turn on the laptop, even a small blinking l...
by Tom_A
Wed Nov 30, 2016 10:17
Forum: LIFEBOOK
Topic: I want to See GPS Tracking On my Notebook
Replies: 1
Views: 3124

Re: I want to See GPS Tracking On my Notebook

Hi Mclaren, For best results, I think you should direct your question to the software provider's support: https://www.gpswox.com/en/contact . Fujitsu notebooks are provided with the Microsoft Windows operating system; if the software is compatible with your version of Windows then it can be used on ...
by Tom_A
Wed Nov 23, 2016 13:02
Forum: LIFEBOOK
Topic: S7110: keybaord replacement, which screws?
Replies: 2
Views: 2964

Re: S7110: keybaord replacement, which screws?

Hi mrtemp,

You have to remove the screws 3 to 8.

The screws 1 & 2 can stay.

Be careful to not pull the speaker and keyboard cable when removing the speaker assembly and keyboard. You will have to disconnect those cables before removing the parts completely.

Go to advanced search