You really need to read something like the Administrator’s Guide - see http://www.fujitsu-siemens.co.uk/support/manuals.html and drill down under Storage for FibreCAT SX60. A VDISK is just a collection of the disks in the system, normally set up as a RAID array. You create volumes on the VDISK. Then...

Have a look at the Options Guide. This can be found at http://manuals.fujitsu-siemens.com/serv ... /start.htm, then in left hand column select Primergy Systems -> Server Systems, and search for TX150 S5. There is page on the SATA SW RAID and the RAID key.

foltos wrote: installation discs were all ready installed on the PDA.

Not quire sure why you mean by this. The PDA comes with the base OS preinstalled - indeed I don't think the customer can install it themselves.

However, I think that the box should normally be sealed.

Have you tried doing a hard reset ? Documented in the manual, also see http://www.fujitsu-siemens.co.uk/rl/ser ... 0.html#FAQ

If that does get a working OS, then you probably need to get it sent to a repair centre.

No idea - but best place to look is probably http://www.pocketloox-choice.com

Check you are on the latest firmware as this may affect the maximum disk size that can be handled by the controller.

Due to licencing restrictions, you cannot download copies of ServerStart. You may be able to purchase a subscription to receive updated ServerStart DVD as they become available. You can find the necessary drivers for download at http://www.fujitsu-siemens.com/support/downloads.html, and should be ab...

Check which SATA ports the Iomega REV Drive and a SATA DVD drive are plugged into. The first 4 ports are should be reserved for the RAID disks and the other devices plugged into the last two ports.