Hello MartynK

I think you should start by enabling the option ROM scan in the BIOS.

Enter the BIOS and select Advanced => PCI Configuration => Ethernet Onboard and enable the option rom for the NIC you want to boot from.

regards.
Data.

Hi M.

I think the USB drivers are part of the chipset driver
Check the chipset drivers on the serverstart cd.
For instance <drive>\\DRV\\Chipset\\General
Or try to install the server with the serverstart CD itself.

Maybe this solves your problem?

Regards.
Data

Hi Berna,

I would like to answer your question but maybe you could try to post your message in English?

Best regards.
Data

Hi CraziiJackal, What do you exactly mean with: "So, I tried to rebuild Raid 5. After successful rebuilding, I rebooted the server but "Operation System cannot be found" appeared and when got back to SCSI card configuration, no HDDs were detected" Does that mean that there are no...

Hi Upload, As a workaround you could try to configure your RAID controller with use of its build in tool. The U320 LSI controllers for instance have the webbios tool which can be invoked by pressing <CTRL> <H> during post. This could problably solve your problem because in this case you can skip the...

Hello realwoman I've tried something like this before on another server and I managed to do so with use of the serverstart cd. So just try to start with serverstart. Choose OS install win2k3 in expert mode Configure the server step by step Select Win XP in the drop down box for the OS Hope this help...

Hi Philbrock. It seems that there is a (COD) configuration on your second disk already. Could it be that this disk was used in another system already? Did you replace the disk online? In this case I would advice you to contact the FSC heldesk maybe they can help you solving this. Good luck, Data.

I agree with RHAF, you should check this with Agfa.
In the mean time you could try to update the BIOS of your server.
You can download it from
http://www.fujitsu-siemens.com/support/downloads.html.

Regards.
Data.

Hi mhdraslan.

PRIMERGY servers can use different RAID controllers, each controller has its own way of rebuilding, restoring configurations etc.
So in order to help you people need at least to know the type of PRIMERGY server you have and which RAID controller you use.

Regards.
Data.

Hello David. I think yo are right about the RAID controller. First you have to find out which RAID controller is in your C150 and which one is in your TX200 S2. Most problably they differ too much, in this case it is simply not possible to exchange the disks. I think you have to back-up your data, c...

Which server and which RAID controller are you using?<P>Greetings Data<BR>

Hi there.<P>Try: <A HREF="http://www.fujitsu-siemens.com/serversupport" TARGET=_blank>www.fujitsu-siemens.com/serversupport</A> <P>or <A HREF="http://www.fsc-pc.de/support/softwareassist_e.asp" TARGET=_blank>http://www.fsc-pc.de/support/softwareassist_e.asp</A> <BR>and search in ...

Hi there.<P>Have a look on the following URL: <A HREF="http://www.fsc-pc.de/support/softwareassist_e.asp" TARGET=_blank>http://www.fsc-pc.de/support/softwareassist_e.asp</A> <P>Search for "D970" in the "Fulltextsearch" box, there you'll find the "Systemboard D970 T...

Hi Janneman.<P>Which controller are you using?<BR>If it is one of the I20 controllers (Adaptec 2010s, 2100s or 3200s) I advice you to install Storage Manager Classic before installing SMBE (Storage Manager Browser Edition).<BR>For these controllers SMBE is depending on some services which come with ...

You could have a look at the following URL: <A HREF="http://www.fujitsu-siemens.com/serverbooks" TARGET=_blank>www.fujitsu-siemens.com/serverbooks</A> <P>(tip, for serversupport or serverstart online cd change "serverbooks" into serversupport or Serverstart) <P>Good luck.<BR>Data...