The date and time in my rX300 s7 keeps resetting the time. The OS is linux showing correct time but the IRMC is always minus 1 hour. Changing the time in the BIOS is reflected in the IRMC only to revert. I can't find any settings to set the time zone or time server ? I missing something ? Thanks Paul

For anyone else out there. It works if you install the IE tab extension in chrome.

Thanks for reply. I am aware firefox doesnt work and chrome gives also gives cipher error same for edge. The java webstart used to work but now thats broken. Error "The server selected protocol version TLS10 is not accepted by client preferences [TLS13, TLS12]" Tried messing with various j...

In case anyone else encounters this problem. This was my misinterpretation of the meaning of the warning light. I expected the warning light to go out if you remove the faulty drive but it stays illuminated to indicate you need to insert replacement. Soon as you insert replacement drive it starts to...

Hello, Rx300 S7. 6 x 2.5 SSD. Inexplicably one of the drives has gone off-line but tests okay in another machine with the crucial software. The backplane on the server is displaying the red warning light and I can't find anything in the manual which explains the meaning of the light. I have switched...

Hello

RX300 S7

I have a licence for video redirection however all I get is this.

Starting Advanced Video Redirection Java applet.
please wait ...

alt=""

If I plug in monitor to vga I get invalid input signal ?

Any ideas ?
Thanks

Thanks I will check and send again.

Thankyou for reply, As I mentioned I have had 2 S8 fail. Before deciding what to do can I send you the log for the original server. This one fails with error 0C0004 CPU1 'CPU1': CPU internal error (IERR) I can boot to bios but get the error trying to boot the OS (any type). I have tried switching cp...

Hello, I have had a second S8 fail In similar circumstances. In this case there is an error reported in the IPMI 020006 PSU Power unit: soft power control failure The unit powers off before I get the BIOS screen. This does not appear to be the PSU and I've swapped the small board that the two power ...

I have had to set up a Home Office and now have 1 rx300 s7 and 2 rx300 s8 servers on the other side of a glass partition. The noise is deafening. They are used for development only so the workload is very light and have ssd so the total power draw is approx 100w. Does anybody know how to reduce the ...

Did you find a solution to this ? I would like to reduce speed of fans on rx300 S7
Paul

Spot on. Would appear I need a licence. Dont think Ive got record of the old one.
Thanks

I have rebuilt an RX300 S8 server with mobo from ebay and updated the BIOS and firmware to the same state as before. This is a backup server and is working okay however in the IRMC I am missing the video redirection HTML5 or JWS so I do not have access to the boot screen. The firmware is the same on...

Thanks for reply. Ive tried everything you mentioned in various combinations inc removing the cpu only thing left to try is the cmos battery. Didnt mean to ignore the versions are BIOS V4.6.5.4 R1.22.0 for D2939-B1x Firmware Version: 9.20F (Base: 9.20.F) Firmware Date: Jan 24 2019 - 19:09:32 CEST Fi...

Thanks for trying to help. Using UPD file the update process starts but get after power on BIOS Flash Status: FLASH ready failed I am seeing in event log Major 160018 iRMC S4 BIOS TFTP or HTTP/HTTPS flash failed and earlier when trying to boot Critical 0C0004 CPU1 'CPU1': CPU internal error (IERR) O...