Problemi alla RAM
Segnalazioni
20h
1-3-1-3
Test DRAM refresh

The bootable RAID controller in this Server should be placed in SLOT2 Do you have any other RAID controller on the server? ANYWAY what OS willyou install over the 2 mirrored M2 SSD by CP200? If the server is running in UEFI MODE (CSM DISABLED) as soon as the BIOS will find a bootable OS in ANY devic...

Hello, I have a customer who needs to connect to a SAN DX80 S2 a brand new server RX2540 M5. (DIRECT ATTACHED FC LINK between SAN and server) The SAN has FC 8Gb/s channel adapter connections and last FW V10L64-3000 The customer has bought 2 FC Card FTS branded Emulex LPe31000 (S26361-F5596-L501) On ...

Hello All, If possible, how can I configure the IRMC S4 remote management board from the ESXi operating system? The server is a Primergy RX2540 M2, installed with ESXi 6.0. I need to configure IP-address, subnet mask and default gateway on a server located in a remote office without any local IT st...

jazzz wrote:I run Proxmox on my TX1320M2. Works great.

Are you running PROXMOX over SATA HDDs connected to the internal SATA RAID onboard?


Andrea

ESXi definitely not supported - and you'd never get it to work with the onboard RAID enabled as ESX doesn't support SATA RAID. I don't think a plug in SAS card is supported in that server either so your only hope would be to run in non-RAID mode. Still unsupported though Well, I think so. I am look...

If the SVIM wizard responds ... Error occurs: "an OEM media was selected but the provided is not OEM." ... Perhaps in the WIZARD do you have selected the default "Fuijtsu/OEM" type of media? Did you try to select "Microsoft" type of media? Which versione of ServerView d...

Hello from Italy, in the last months after the last updates to iRMC and SVIM suite, it's not possible to check anymore the URL of the two entries for the UPDATE and DEPLOYMENT eLCM repositories. Of course it's not possible to schedule the typical tasks! The attached screenshot is from RX2540 M4 with...

Hello from Italy, In a Primergy TX1330 M3 working since Jaunary 2018 OS has rebooted after a Graceful Shutdown. I have a LOG entry in IPMI SEL Operating System Shutdown - Reason: 0xc0030000 "software: other issue". Can it come from a scheduled reboot By Update Agent? Probably this type of ...

Hello from Italy, I'm bringing to the english speaking forum a thread started in the German one at the link https://forum.ts.fujitsu.com/forum/viewtopic.php?f=72&t=47646 I'm having a problem on TX150 S8 that some other users have get on similar series servers like RX200 S7. Ths server does not s...

And surprise surprise, it recommends replacing the power distribution board. Amateurish Fujitsu support telling me to switch main board. :( Now ordering this part next. Hello from Italy! My customer has the SAME PROBLEM now on a TX150 S8. It's good then to CHANGE ONLY the POWER BACKPLANE / DISTRIBU...

Hello from Italy, on the new Primergy Systems with CPU Xeon E3-1220v6 delivered with Windows Server 2012R2, it seems not possible to download update patches via WinUpdate. The On Screen Error is the one of this link: https://support.microsoft.com/en-us/help/4012982/the-processor-is-not-supported-tog...

Please close the THREAD. The problem is not a problem... The customer has fixed the problem reinstalling fresh Windows10 with Recovery-DVD Another way not to get the problem is to completely run and finish factory preload with only onboard HD graphics, and then with Windows already running install R...

Hello,

the freshly distributed FTS Custom Image of VMWARE 6.5 (ver 400.1.4564106) does not support UFM Module.

Tested over RX2540 M2 and TX2560 M2

Have you noticed how to get a workaround?

Regards, Andrea

In a few days I have to check the error by a Remote Desktop Connection with TeamViewer or similar, but if I have well understoodd from the customer, the really strange trouble it's that there's not ANY UNRECOGNIZED GRAPHIC CARD in the device manager In the device manager graphic card section, there'...