Hello,
I have the Amilo Pi 2512 notebook. The hdd is faulty.
Can I use some sata-2 hdd or it must be sata1 hdd?

Thanks,
Dragan

I got the answer form Fujitsu Technology Solutions Technical Support:
Only these HDDs are tested and supported by Fujitsu:

80 GB S-ATA 150 (5400 rpm)
120 GB S-ATA 150 (5400 rpm)
160 GB S-ATA 150 (5400rpm)
250 GB S-ATA 150 (5400rpm)


Thank you anyway...

there is no AHCI option in BIOS. The OS is Winxp pro sp3. I updated bios to last version (1.13) on saturday.

I installed disk HDD 320 GB, WD3200BEVT, 2.5", SATA-2, 5400 rpm, 8 MB in this laptop, but there is BSOD 0x000007B....

I tried this HDD in other laptop with sata-2 controller and hdd works OK, also I tried other sata-1 hdd in this laptop and laptop works ok.

Can you help me?

that's error is because the hdd is WD3200BEVT, 2.5", SATA-2, but that laptop uses SATA-1 controller...

Have you any idea how to fix it or I must find sata-1 hdd?

Hi,
does anyone know what the difs code: 75WK-YAVZ-68QEW means?
The serial is: YKDA029145.

Thanks

Hi,
does anyone know what the difs code: 75WK-YAVZ-68QEW means?
The serial is: YKDA029145.

Thanks

IXL wrote:Update BIOS ?

at least 3 times

I tried both ide cables 80 and 40 wired, psu from hp d530, but the same hdd has been recognized only...

I think that I tried both 40 and 80 wired ide cables, but I will check again. I tried few PSUs, but all PSUs were "new type"... I will try the PSU from my HP d350 and let you know. The recognized HDD has a spec. 5V 500mA 12V 700mA, all others HDDs need a less amperage. For example, the sam...

That HDD has worked in that PC until PSU has changed. It is some IBM 60 GB model. I wrote in my first post that I have tried 5 hard disks and just one has been recognized, just in master mode, but all those HDDs have been recognized in another PC with no problems.

I tried to connect dvd and hdd onto the same cable (master-slave, slave-master), I tried hdd and dvd onto different cables, I tried to swapp cables, ide controllers. If I turn on pc without ide cable connected to hdd, then I hear how hdd works, but if I turn on pc with ide cable connected then it lo...

I've changed the PSU, after thar the bios doesnt recognize hdd (it is some ibm IDE model), but dvd rw does. I tried another 5 IDE HDDs but only one has been recognized, just in master mode. I also tried many cables, and another psu, bios reset.... All those 6 hdds another computer/bios recognized wi...