You will need need to install a usb2 card (cheap as chips on ebay) http://computers.shop.ebay.co.uk/Interface-Cards-/90711/i.html?Interface%2520Card%2520Type=USB%2520Cards&_catref=1&_dmpt=UK_Computing_ComputerComponents_InterfaceCards&_fln=1&_ssov=1&_trksid=p3286.c0.m282 Windows ...
Hi. Not 100% on this but I think this may be due to your sata drive being attached as a secondary drive (slave).Because sata drives don't have the usual master/slave/cs jumpers the bios would see it as a master even tho it is attached to secondary channel. Perhaps installing an o/s to the sata and m...
Ok. Looks like your close to your limit with your 3.2g.The fastest P4 processers available are 3.4g extreme edition.Very expensive (around £180 second hand),so with a view to future upgrades a new m/b might be the best way forward. specs here:-http://www.cpu-world.com/CPUs/Pentium_4/Intel-Pentium%20...
Can't understand why it's not switching. Just wondering why only one machine has the bios option,have you upgraded the bios or m/board on any of the machines?
Hi. Looking at the manual there doesn't appear to be any obvious way to disable on board graphics (as i said the switch should be automatic) I noticed you "disabled" your onboard graphics.Try uninstalling it.switch your pc off then install the new card. It is possible that there is an irq ...
Hi. Most m/boards switch from onboard to the new card automatically when you install it.Have you tried the new card in another machine.(it may be faulty). Please post your m/board make and model.