Hi Sabrex
Yes the realtek setup had changed. Now back up and running. Sorry for late reply.

Hi Rigel. Thought you would like to know that the issue was the start button on the computer case. It was faulty i ended up having the case changed. I didn't choose a direct replacement and this mean't i lost my wireless connection as the wireless on this model is integeral to the computer casing so...

I noticed for an earier post that a replacement graphics card was drawing more power than the factory fitted one. By replacing the power unit it overcame the problem. I also had to replace my graphics card (although it was a while ago no prob upto now?) I put in a GeForce 210 1GB PCI-E. Would anyone...

Further to above I tried the removing ram but that did not work. I have had another instance where the computer did not start first time took two goes symptoms as my first post. Then after around 15 minutes half way thriough an e-mail!!! the computer went off but did not completely power off. The Bl...

Hi My computer tries to start then all the power goes off. Most of the time it does not get to the windows startup screen. The fan comes on it revs up then before we get through the bios stage it turns itself off again. Sometimes it can take upto 4 attempts to get it to startup. Once it does get to ...

I have replaced my graphics card and now I have no sound to the rear jack plug sockets (I have a Pi2664) On the old card there were some wires coming from the graphics card and plugged into the motherboard near to the rear jack plug socket unit. Can this connection be anything to do with it?

i have changed my graphics card and that seems to have cured my problem

I have exactly the same problem same sequence of beeps as you I am in touch with the technical desk but there is no solution yet.

Hello.
I have a PI 2664 machine with multi card reader. Can i use an SD HC card? The machine does not seem to see it.
Regards
Lee

Hi Alexander.
That worked fine.
Thanks for the help
Lee

Hi Alexander.
Sorry for delay if i disable the USB legacy will it effect any other USB devices i use in the future?
Regards
Lee

Thanks Alexander
Before I disable the lagacy, one other thing, the computer seems to think the printer is a drive and an optical device does not see a printer in the device manager?
Does this make sense?
Best Regards
Lee

Computer will not auto boot past the first screen after I attach my Epson RX560 printer. Will boot if I press F12 the Esc to selet default boot. It will also boot ok without the printer attached.! According to Epson the drivers are compatiable with Vista. Does anyone know how to solve this?
Thanks
Lee