Hi, the system is released with HP dataprotector. In the HP list online at: http://bizsupport.austin.hp.com/bc/docs/support/SupportManual/c00766445/c00766445.pdf there is listed only the 32bit Windows. But our technicians told me that the TX S2 is released with 64bit Windows, the listing at HP is in...

Hello, FC connector: use the LC connection for the FibreChannel interface; for all FibreCAT TX FibreChannel drives/model it is LC. FCTX24-112-L3F: the machine is EOL, we recommend the FibreCAT TX24 S2 model: FCTX24S-112-L4H. The TX24 S2 is equipped with 1 LTO-4 HalfHeight FC drive. Upgrade to 2 LTO-...

Hello, did you already solve the problem? I know that there are different ship lock types. The latest TX48 are delivered with red ship locks. How to unlock should be described in the Quickstart guide. Download additional documents here: http://support.fujitsu-siemens.com/com/support/manuals.html Ope...

Hello FW Up- and Downgrade tests under Solaris were made. The result of the tests: - libTool (V1.94): test ok - ltoTool (V4.92): test shows a little mistake in the display. The FW Upgrade was ok, but at the end of the flash function: old/new FW, the dsiplay shows the old FW version. After re-call th...

Hi Flavio, Please install device patch 12 (QO92951) from https://supportconnectw.ca.com/public/storage/downloads/nt/115/basbr115-solpatch.asp for running Windows or device patch 15 (QO92850) from https://supportconnectw.ca.com/public/storage/downloads/linux/115/basblinuxr115-solpatch.asp when runnin...

Hello, I think the library is not the cause for your problem. Because of: 1) new libraries are not password protected. 2) if a password was set, you can connect the FibreCAT TX24 to the network and work with the remote management, but you have no access to the whole functionality of the remote manag...

Hello, normally you don't need a special driver for the robotic, it's provided with the backup SW. The FibreCAT TX24 uses different LTO devices. For the LTO-3 drives you have to install the IBM device driver, vers. 6.1.3.8, see the FSC support page: http://www.fujitsu-siemens.com/support/linkapplica...

Die FibreCAT TX24 / TX48 ist nur im Emulationsmode (als Magnum) von Tandberg für das Backup Programm BakBone NetVault 7.4 (Magnum Series Only) freigegeben. Fujitsu Siemens Computers übernimmt für dieses Programm keinen Support!! Im Vergleich zum Tandberg Produkt besitzt die FibreCAT TX24 /TX48 einig...

Wichtig ist auch noch zu wissen, in welcher Umgebung die FibreCAT TX48 eingesetzt ist (welcher Server, Backup SW, OS, usw.) Wenn der Controller in einer Primergy eingesetzt wird, dann ist in der Primergy Freigabematrix beschrieben ob der Controller dort eingesetzt werden kann. Der Bereich Storage le...

elxcfg ist für W2k und W2k wird nicht supported Die FibreCAT TX48 /TX24 ist nur unter W2k3 mit dem StorPort Treiber freigegeben. Der wird mit HBAanyware konfiguriert. Die Einstellung zum StorPort Treiber steht in MatrixEP im Extranet: http://extranet.fujitsu-siemens.com/service/storage/matrixep Mein...

Hello, sorry, it is not possible to import the TX10 from Germany, because of service and warranty issues. The data will grow all year. Therefore the entry configuration of the FibreCAT TX24 (D:TX24-S12-L2H) with 1LTO-2 drive and 12slots, 5500€ listprice) is the best alternative. With TX24 you can gr...

Hello,
You are right the FibreCAT TX10 PacketLoader isn't available in Italy. For detail information please contact your Fujitsu Siemens Computers contact person.
Regards Helga

Hello, it is no driver for the robotic necessary. normally the driver is implemented in the backup software, like NetWorker or ArcServe. By using Tivoli the driver is integrated in the IBM driver. By using ArcServe no installed driver is allowed, nor for the robotic either for the drive! I hope this...