I have a problem about catalysts 8.7 to 8.9. Although I want to install for my Windows XP SP3, it corrupts and say that this driver is not suitable for your operating system. Is tehre anybody faced with this kind of problem, once I had no problem and I used to install all the catalyst mobility drive...

Unfortunately this is not a driver problem, so you can send it to an official service immediately. I've been subjected to same problem 1 year ago and after a searching period I had learnt that the problem was based on the case cracks or the graphics card cable. Many of 14xx series have this fabricat...

In general this type of controller check whether the bad sector exist or not, so I advice you to use tune-up disk doctor to overcome the bad sector You can download the trial version for 30 days.

http://www.tune-up.com

Try the other USB Port and even the secret one:) Sometimes some USB port has a problem like electrical! So I use the secret USB port for my wireless mouse mini USB drive and the other 3 port are empty.

http://tsavaci.googlepages.com/NEC_ND-6650A.zip

From the link above, you can download the newest version 1.43 (01.03.2006), this firmware brings some speed increse and fixes a problem that the drive doesn't wake up.

I give my special thanks to Turgay Savaci for the newest firmware 1.43

Hi everyone, I want to upgrade my DVD-RW firmware version due to some malfunction about writing speed of DVD+R. Altough my NEC 6650A supports the writing speed at 8x, it cannot burn DVD+R media at 8x, only burn 4x!. Therfore, I want to upgrade the firmware from 1.42 to the newest one. Is there anyon...

Since I have an exam of Structural analysis 1 hour later, I'll try to make an advice to you after that

What is the type of your GPU? If it's a kind of oldest chipset, it cannot work as efficiently as a newest chipset, so the resolution is set to 800x600 and the lowset settings are chosen automatically. My GPU is Ati Radeon Mobility 9700 128MB and I can play Call of Duty 4 with a frame rate of 35fps/s...

These are the newest drivers, but when using it please install only the wireless lan driver, not the whole software!

http://forum.ts.fujitsu.com/forum ... c&start=15

This is normal, since the cpu frequency decreases to 800Mhz when it is not working under high load! such as using word, excel, or browsing the internet.

http://www.ati.com/online/mobilecatalyst/

try this link...

http://www.ati.com/online/mobilecatalyst/

try this link...

Try to load optimal bios defaults in the bios menu. My case has also crashed and it was changed by warranty.

Try to change windows power scheme. Normally it is adjusted to portable/laptop power scheme and this reduces the cpu frequency when using battery, so if you change it with home/office desk, the cpu frequency does not change even if you use your laptop with battery or AC-Line, but this decreases the ...

You should send it to service as soon as possible. It seems to a mainboard problem! But firstly, enter the bios and load the optimal settings, then restart and try using the usb ports again.