Hello :) To toggle the system status between "Maintenance" and "Normal": • Keep the Function Button pushed for three seconds • The MNT LED lights green when the system is in Maintenance mode • The MNT LED is off when the system is in Normal mode In case you have any other questio...
Hello, Thank you for contacting Fujitsu. Initialization of the factory user accounts ''root'' and ''f.ce'' to the default settings. • (1) Switch on "Maintenance Mode" • (2) All management LAN ports (RMT and MNT) must be uncabled, means "link Down" • (3) Push down the Function But...
Hello, Thank you for contacting us. For shutting down storage you can use CLI command >>shutdown -mode off See page 620 of CLI manual by the link below. Use ssh protocol and invoke Non-interactive CLI command execution. (page 24 of CLI manual) For doing power-on please familiar yourself with Wake-On...
Hello, Since the BIOS password is one of the security features, we kindly advise you to contact your local Fujitsu support and open a service ticket. We kindly advise you to reach our technical support team using this link (https://www.fujitsu.com/global/support/) and select the desired region/count...
Please, make sure that the ventilation ways are not being obstructed by anything, nor the bottom or the back side one, then we recommend the user to contact technical service for further troubleshooting.
Hello, Thank you for contacting Fujitsu. Without the serial number of the device, I unfortunately do not know whether the data carriers (hard disk or SSD) are controlled via the memory controller of the chipset itself or a possibly additionally plugged controller (e.g. RAID). In addition, the CELSIU...
Hello, Thank you for contacting Fujitsu. Please, install ServerView Agents from this site and update all: https://support.ts.fujitsu.com/prim_supportcd/SVSSoftware/html/SNMP_Agents_e.html Or you can use ServerDVD in Expert Mode https://support.ts.fujitsu.com/IndexDownload.asp?SoftwareGuid=FB0B13D1-B...
Hello , Thank you for contacting Fujitsu Forum Support. We kindly advise you to contact our official resellers as they are in a more suitable position to properly assist. Please use the following link to our online reseller locator, which is available via the website, and select according to the loc...
Hello, Thank you for contacting Fujitsu Forum Support! ESPRIMO P920 onboard graphics are VGA, DVI-D and DP, you can use an adapter. Depending on the configuration, the PC can be equipped with an external graphics card, however it can only be determined basing on the serial number. Best regards, Fuji...