==================================================================================
Download: http://mai-computerhilfe.de/NExt/Addons/
Aktuelles Paket: NEXT_python--2.6.1b--FSC_231.tgz-FSC_222.tgz
Aktuelles Readme (EN): NEXT_python---2.6.1b--readme.txt
Aktuelles Readme (DE): NEXT_python---2.6.1b--readme_de.txt
==================================================================================
Diese Software ist ausschließlich dazu bestimmt, mit den "NExt" Firmware Extensions für AMS150 und kompatible NAS Geräte genutzt zu werden.
WICHTIG:
Um dieses Paket nutzen zu können, muss vorher das "NExtFW Base" Paket installiert werden.
INSTALLATION DES PAKETES:
Das Paket kann über das Admin-GUI des Gerätes installiert werden ("Wartung" - "Firmware-Erweiterungen laden") / ("Maintenance" - load firmware extensions") oder über ein Netzwerklaufwerk. Das Admin-GUI erreichen Sie unter http://<NAME_DES_GERÄTES> oder http://<IP_ADRESSE_DES_GERÄTES>. Informationen zur Version des Paketes erhalten Sie auf der "NExtFW" Statusseite. Diese erreichen Sie im Admin-GUI, nachdem Sie das "NextFW Base" Paket installiert haben.
Alternativ können Sie auch das NEXT_webadmin Paket installieren, das mehr Funktionalität bietet.
WICHTIG: Bitte beachten Sie, dass eine Installation der original Firmware Extensions die "NExt" Firmware Extensions nicht vollständig deinstalliert. Bitte installieren Sie zum Entfernen der Extensions das "NExtFW cleanup" Paket, welches die Extensions vollständig löscht oder formatieren Sie die Festplatte. (!!! dabei gehen alle Daten verloren !!!)
Einzelne Pakete können über das NEXT_webadmin Paket oder per Kommandozeile deinstalliert werden.
PAKETINHALT:
Diese Erweiterung installiert Python 2.6.1 auf dem Gerät.
Third Party Tools sind ebenfalls installiert:
yEnc 0.3 Module for Python, Cheetah 2.2.1, cElementTree 1.0.5, ElementTree 1.2.6, pyOpenSSL-0.7, pycrypto-2.3, flup 1.0.2, python-imaging-1.1.7, Django 1.2.3, libxml2-python-2.6.9
ÄNDERUNGEN:
- 2.6.1b:
Beaker-1.5.4 und Jinja2-2.5.5 hinzugefügt
- 2.6.1a:
python-imaging auf Version 1.1.7 upgedatet, libxml2-python-2.6.9 hinzugefügt, pyusb-1.0.0-a1 hinzugefügt, *.pyc und pyo Dateien entfernt
- 2.6.1:
Update auf neue Python version 2.6.1
pycurl-7.19.0, Django-1.2.3, flup 1.0.2, python-imaging-1.1.6 hinzugefügt
update pycrypto auf Version 2.3
- 2.4.6:
Update auf neue Python Version 2.4.6, Update Cheetah auf 2.2.1
- 0.96:
deutsches Readme, Änderungen in den Readme Dateien
- 0.97:
pycrypto 2.0.1 hinzugefügt
- 0.98:
Shared Library Konflikt mit anderen Paketen beseitigt
- 0.99:
erste Beta Version
VORAUSSETZUNGEN:
- NEXT_base 1.0.04 / 2.0.04 oder neuer
PROBLEME UND EINSCHRÄNKUNGEN:
- keine
Diese Software wird in der vorliegenden Form, ohne Gewähr auf Funktion, bereitgestellt. Für eventuelle Schäden, die durch die Benutzung der Erweiterungen entstehen können, können wir nicht haftbar gemacht werden. Die Benutzung der Software geschieht auf eigenes Risiko.
Have fun,
Brevheart und das NExtFW Team
==================================================================================
IMPORTANT:
This software is intended to be used with the "NExt" Firmware Extensions for AMS150 and compatible NAS devices only.
IMPORTANT:
To use this package you will need to install the NExtFW base package first!
HOW TO INSTALL THIS PACKAGE:
The package can be installed via the Admin-GUI of the device ("Maintenance" - "load firmware extensions") or via network share. You can reach the Admin-GUI at http://<NAME_OF_THE_DEVICE> or http://<IP_ADDRESS_OF_THE_DEVICE>. Version information for this package is displayed via the "NExtFW" status page which you can reach via Admin-GUI right after you have installed the base package.
Alternatively, you can install the NEXT_webadmin package with more functionality.
IMPORTANT: Please note that installing the original Firmware Extensions will not automatically deinstall the "NExt" Firmware Extensions completely. Please install the NExtFW cleanup package provided by NExt or format the hard disk (loosing all data!) to get rid of the Firmware Extensions at all.
Single packages can be deinstalled via the NEXT_webadmin package or via command line.
PACKAGE CONTENTS:
This addon adds Python 2.6.1 to your device.
Third Party Tools installed:
yEnc 0.3 Module for Python, Cheetah 2.2.1, cElementTree 1.0.5, ElementTree 1.2.6, pyOpenSSL-0.7, pycrypto-2.3, flup 1.0.2,
python-imaging-1.1.7, Django 1.2.3, libxml2-python-2.6.9, pyusb-1.0.0-a1
CHANGES:
- 2.6.1b:
Beaker-1.5.4 and Jinja2-2.5.5 added
- 2.6.1a:
update python-imaging to version 1.1.7, libxml2-python-2.6.9 added,
pyusb-1.0.0-a1 added, *.pyc and *.pyo files cleaned
- 2.6.1:
update to new python version 2.6.1
pycurl-7.19.0, Django-1.2.3, flup 1.0.2, python-imaging-1.1.6 added
update pycrypto 2.3
- 2.4.6:
update to new python version 2.4.6, update Cheetah to 2.2.1
- 0.96:
german readme, changes to readme files
- 0.97:
added pycrypto 2.0.1
- 0.98:
fixed share library conflicts with other packages
- 0.99:
first beta version
PREREQUISITES:
- NEXT_base 1.0.04 / 2.0.04 or newer
ISSUES AND RESTRICTIONS:
- none
This software is provided as is with no warranty of functionality. We cannot be held responsible for any damage that may occur after installing this extension. You use this Software at your own risk.
Have fun,
Brevheart and the NExtFW team