Kein signal über DVI und Scart, nur über VGA

BILDAUSGABE AN TV

Moderator: ModTeam

MK44
Posts: 1
Joined: Tue Sep 11, 2007 22:42

Kein signal über DVI und Scart, nur über VGA

Postby MK44 » Thu Sep 13, 2007 22:57

Hello

I purchased a new Activy 530 DVB-T from Germany, it worked OK for 3 days connected with Scart cable to a tv.
After that I connected it to my projector on the DVI output, and then the problems started.
I did not get any signal over the DVI and the signal over Scart also disappeared. The TV sound works on Scart and also the loop-thru from an X-box connected to the Aux Scart.
The VGA connector still works normal.
Have tested to reboot in all possible ways and also re-installed the same software again and also the factory image were all setups are lost, but still the same problem.
I know that only one output can be used at the same time. It has been completely powered down and restarted when shifting output.

I’m suspecting it can be a hardware problem with the graphic-card.

Have any one else experience like this? Or any solution?

Regards
Peter Lindström
Sweden

Return to “Display output on TV”

Who is online

Users browsing this forum: No registered users and 1 guest

cron