AMS150: SMART Status abfragen

GRUNDLAGEN

Moderator: ModTeam

Tighty
Posts: 13
Joined: Mon Nov 26, 2007 11:37

Re: AMS150: SMART Status abfragen

Postby Tighty » Sun Feb 13, 2011 12:58

Code: Select all

amsadmin# smartctl -t long -d ata /dev/sda
smartctl 5.40 2010-10-16 r3189 [powerpc-unknown-linux-gnu] (local build)
Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net

=== START OF OFFLINE IMMEDIATE AND SELF-TEST SECTION ===
Sending command: "Execute SMART Extended self-test routine immediately in off-li
ne mode".
Drive command "Execute SMART Extended self-test routine immediately in off-line
mode" successful.
Testing has begun.
Please wait 72 minutes for test to complete.
Test will complete after Sun Feb 13 11:35:13 2011

Use smartctl -X to abort test.
amsadmin# smartctl -l selftest -d ata /dev/sda
smartctl 5.40 2010-10-16 r3189 [powerpc-unknown-linux-gnu] (local build)
Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net

=== START OF READ SMART DATA SECTION ===
SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA
_of_first_error
# 1  Extended offline    Completed: read failure       20%      5005         168
245292
# 2  Short offline       Completed: read failure       60%      5001         168
245292

amsadmin# smartctl -l error -d ata /dev/sda
smartctl 5.40 2010-10-16 r3189 [powerpc-unknown-linux-gnu] (local build)
Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net

=== START OF READ SMART DATA SECTION ===
SMART Error Log Version: 1
Warning: ATA error count 24071 inconsistent with error log pointer 5

ATA Error Count: 24071 (device log contains only the most recent five errors)
        CR = Command Register [HEX]
        FR = Features Register [HEX]
        SC = Sector Count Register [HEX]
        SN = Sector Number Register [HEX]
        CL = Cylinder Low Register [HEX]
        CH = Cylinder High Register [HEX]
        DH = Device/Head Register [HEX]
        DC = Device Command Register [HEX]
        ER = Error register [HEX]
        ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 24071 occurred at disk power-on lifetime: 5003 hours (208 days + 11 hours)
  When the command that caused the error occurred, the device was in an unknown
state.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 67 19 1d c0 e0  Error: UNC 103 sectors at LBA = 0x00c01d19 = 12590361

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  25 00 68 19 1d c0 e0 00      02:56:38.256  READ DMA EXT
  25 00 70 11 1d c0 e0 00      02:56:37.008  READ DMA EXT
  25 00 78 09 1d c0 e0 00      02:56:35.744  READ DMA EXT
  25 00 80 01 1d c0 e0 00      02:56:34.480  READ DMA EXT
  25 00 88 f9 1c c0 e0 00      02:56:33.232  READ DMA EXT

Error 24070 occurred at disk power-on lifetime: 5003 hours (208 days + 11 hours)
  When the command that caused the error occurred, the device was in an unknown
state.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 67 11 1d c0 e0  Error: UNC 103 sectors at LBA = 0x00c01d11 = 12590353

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  25 00 70 11 1d c0 e0 00      02:56:37.008  READ DMA EXT
  25 00 78 09 1d c0 e0 00      02:56:35.744  READ DMA EXT
  25 00 80 01 1d c0 e0 00      02:56:34.480  READ DMA EXT
  25 00 88 f9 1c c0 e0 00      02:56:33.232  READ DMA EXT
  25 00 90 f1 1c c0 e0 00      02:56:31.968  READ DMA EXT

Error 24069 occurred at disk power-on lifetime: 5003 hours (208 days + 11 hours)
  When the command that caused the error occurred, the device was in an unknown
state.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 67 09 1d c0 e0  Error: UNC 103 sectors at LBA = 0x00c01d09 = 12590345

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  25 00 78 09 1d c0 e0 00      02:56:35.744  READ DMA EXT
  25 00 80 01 1d c0 e0 00      02:56:34.480  READ DMA EXT
  25 00 88 f9 1c c0 e0 00      02:56:33.232  READ DMA EXT
  25 00 90 f1 1c c0 e0 00      02:56:31.968  READ DMA EXT
  25 00 98 e9 1c c0 e0 00      02:56:30.704  READ DMA EXT

Error 24068 occurred at disk power-on lifetime: 5003 hours (208 days + 11 hours)
  When the command that caused the error occurred, the device was in an unknown
state.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 67 01 1d c0 e0  Error: UNC 103 sectors at LBA = 0x00c01d01 = 12590337

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  25 00 80 01 1d c0 e0 00      02:56:34.480  READ DMA EXT
  25 00 88 f9 1c c0 e0 00      02:56:33.232  READ DMA EXT
  25 00 90 f1 1c c0 e0 00      02:56:31.968  READ DMA EXT
  25 00 98 e9 1c c0 e0 00      02:56:30.704  READ DMA EXT
  25 00 a0 e1 1c c0 e0 00      02:56:29.456  READ DMA EXT

Error 24067 occurred at disk power-on lifetime: 5003 hours (208 days + 11 hours)
  When the command that caused the error occurred, the device was in an unknown
state.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 67 f9 1c c0 e0  Error: UNC 103 sectors at LBA = 0x00c01cf9 = 12590329

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  25 00 88 f9 1c c0 e0 00      02:56:33.232  READ DMA EXT
  25 00 90 f1 1c c0 e0 00      02:56:31.968  READ DMA EXT
  25 00 98 e9 1c c0 e0 00      02:56:30.704  READ DMA EXT
  25 00 a0 e1 1c c0 e0 00      02:56:29.456  READ DMA EXT
  25 00 a8 d9 1c c0 e0 00      02:56:28.192  READ DMA EXT

amsadmin#


So das kam beim long Selftest raus. Ist die Platte endgültig hin oder sind noch ein paar Reservesektoren da?
AMS 150 1TB WD10EARS :-)
Fritzbox 7170 Firmware 29.04.80
Samsung LE40C6540

http://sig.sysprofile.de/quicksys/sysp-138061.png

vander
Posts: 10
Joined: Fri Nov 27, 2009 15:04
Product(s): AMS150

Re: AMS150: SMART Status abfragen

Postby vander » Sun Feb 13, 2011 19:25

Ich befürchte diese Frage kann ich nicht beantworten. Der Long Test sollte nur dazu dienen alle evtl. noch nicht erkannten defekten Sektoren zu lokalisieren, so das weiterer Schaden am Dateisystem vermieden wird. Ich würde auf einer Platte mit defekten Sektoren generell keinerlei wichtige Daten mehr speichern und über einen Austausch nachdenken.


Return to “Basics”

Who is online

Users browsing this forum: No registered users and 1 guest

cron